Material deviation may be caused by the following reasons:Guidance device issue: Check if the guidance device of the slitting machine is aligned correctly.Improper blade setting: Adjust the position and angle of the blade to ensure precise cutting.Uneven material tension: Adjust the tens
2024-12-02
The weak welding may be caused by the following factors:Improper power setting: Adjust the power setting to ensure that the welding energy is suitable for the material.Insufficient welding time: Increase welding time to ensure sufficient fusion of materials.Welding head wear: Check if th
2024-12-02
The weak adhesion of materials may be caused by the following reasons:Insufficient power: Check if the ultrasonic power is sufficient and increase the power if necessary.Uneven pressure: Ensure even pressure distribution during the composite process.Material issue: Check for contaminatio
2024-12-02
Excessive noise may be caused by the following factors:Bearing wear: Check whether the bearings in the equipment are worn, and replace the worn bearings.Loose screws: Check if the screws on the equipment are loose and ensure that all components are securely fastened.Ultrasonic frequency
2024-12-02400 075 1369
